- 8 -
UP
Control
input
A short press on the UP button starts
the cascade moving from top to bot-
tom. The last circuit controlled will be
switched on first, then the penultimate
circuit, and so on until the first circuit
OUT 1 is reached. Each of the outputs
will be switched on for the time TIME
(set by the knob on the controller). The
delay between switching on subsequ-
ent outputs is set on the controller with
the DELAY knob.
Warning!
If the UP button remains
pressed the lights remain on for the
duration of the press. The shutdown
sequence of each output will begin
when the UP button is released.
ON
Control
input
Triggering the ON input causes simul-
taneous activation of all controlled
output circuits of the controller. The
circuits remain switched on as long as
the ON input is triggered. In this mode,
the operation of the DOWN and UP
inputs is locked.
Summary of Contents for AS-225D
Page 6: ... 6 Wiring diagram ...
Page 14: ......
