- 14 -
No connection
to Wi-Fi network
Restoring firmware
Three LED lights (L1, L2, L3) on the front of the unit on the ri-
ght-hand side are used to indicate the presence of voltage and
power consumption. A light on indicates the presence of voltage
on a given measuring circuit. A short blink indicates active ener-
gy consumption: 1 pulse = 1 Wh.
In case of lack of access to the controller, for example due to
lost passwords, it is recommended that you reset the access
passwords and then reconnect and configure the controller
using the Fox application.
To reset passwords:
1. While the controller is operating, press and hold the
RESET
button on the front of the controller. When the button is pres-
sed, the green LED (
STATUS
) will start to flash rapidly.
LED signalling cont.
Energy consumption signalling
Restore factory settings
Summary of Contents for FOX ENERGY 3
Page 4: ...4 Wiring diagram...