F&F STR-3 Pico, Manual

- 2 -

Controller control inputs are divided into two groups: local con-

trol and central control.

����� �������

Depending on how you connect the controller, it can operate in 

one or two local keys mode.

One local key

Local control input 

����

  is connected permanently to the N 

line. Local control input 

��

 is connected to a key that alternate-

ly switches the roller blind to move up or down. Short press 

(<0.5 s) switches on the blind for a programmed time. Pressing 

the key when the roller blind is already in motion causes the roll-

er blind to stop.  Long press (>0.5 s) switches on the roller blind 

for as long as the key is pressed.

Each time you press the key the roller blind will move in the di-

rection opposite to the previous one.

Two local keys

Each direction of movement has its own local key. Short press 

(<0.5 s) switches on the roller blind to move in a given direction 

for the programmed period of time. Pressing the key when the 

roller blind is already in motion causes the roller blind to stop.

Long press (>0.5 s) switches on the roller blind to move in a given 

direction for as long as the key is pressed (this allows for example 

to adjust the tilt of slats).

Control