- 1 -
ZI-USB-5
USB power supply
The ZI-USB-5 is used to power electrical and electronic devices
via the standard A-type USB output.
1. Turn off the power.
2. Connect the power cables to the input terminals 1-3 of the
power supply in accordance with the markings: 1 (+) and 3 (–).
3. Connect the cable with the USB A plug to the socket located at
the bottom of the module.
Purpose
Mounting
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
Do not dispose of this device in the trash along with other waste!
According to the Law on Waste, electro coming from households free of charge and can
give any amount to up to that end point of collec� on, as well as to store the occasion of
the purchase of new equipment (in accordance with the principle of old-for-new, regard-
less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the
environment and human health.
Summary of Contents for ZI-USB-5
Page 2: ... 2 Connection diagram ...
Page 4: ......
