F&U FLS32229, Instruction Book

English

   - 15 -

not meet the speed requirements. Try connecting 

another USB disk.

Media Browser

You can play back music and movie files and display 

photo files stored on a USB storage device by 

connecting it to your TV. Connect a USB storage device 

to one of the USB inputs located on the side of the TV. 
After connecting a USB storage device to your TV, the 

Sources

 bar will be displayed with USBx highlighted. 

Press 

OK

, 

Media Browser

 menu will be displayed on 

the screen. Select the file of your choice and press 

OK

to display or play it back. You can access the content 

of the connected USB device any time later from the 

Sources

 menu. You can also press the 

Source

 button 

on the remote and then select your USB storage device 

from the list of sources.
You can set your media browser preferences by using 

the 

Settings

 menu. 

Settings

 menu can be accessed 

via the information bar which is displayed on the 

bottom of the screen while playing back a video or 

an audio file or displaying a picture file. Press the 

Info

 button if the information bar has disappeared, 

highlight the gear wheel symbol positioned on the 

right side of the information bar and press 

OK

. 

Picture 

Settings

, 

Sound Settings

, 

Media Browser Settings

and 

Options

 menus may be available depending on 

the media file type and the model of your TV and its 

features. The content of these menus may also differ 

according to the type of the currently open media file. 

Only 

Sound Settings 

menu will be available while 

playing back audio files.

Loop/Shuffle Mode Operation

Start playback and activate 

All files in the list will be 

continuously played in 

original order

Start playback and activate 

The same file will be 

played continuously 

(repeat)

Start playback and activate 

All files in the list will be 

played once in random 

order

Start playback and activate 

, 

All files in the list will be 

continuously played in 

the same random order

To use the functions on the information bar highlight the 

symbol of the function and press 

OK

. To change the 

status of a function highlight the symbol of the function 

and press 

OK

 as much as needed. If the symbol is 

marked with a red cross, that means it is deactivated.

Custom Boot Up Logo

You can personalize your TV and see your favourite 

image or photo on the screen each time your TV boots 

up. To do this, copy your favourite image files into a 

USB disk and open them in the 

Media Browser

. Select 

USB input from the 

Sources

 menu and press 

OK

. 

When you have chosen the desired image, highlight 

it and press 

OK

 to view it in full screen. Press the 

Info

 button, highlight the gear wheel symbol on the 

information bar and press 

OK

. Select 

Options

 and 

press 

OK

 to enter. 

Set Boot Logo

 option will be 

available. Highlight it and press 

OK

 again to choose the 

image as custom boot logo. A confirmation message 

will be displayed. Select 

Yes

 and press 

OK

 again. If 

the image is suitable

(*)

 you will see it on the screen 

during the TV’s next boot up.

Note:

 You can use the 

Restore Default Boot Logo 

option in 

the 

Settings>System>More 

menu to restore the default boot 

logo. If you perform 

First Time Installation

 the boot logo will 

also be restored to its default.

(*) 

Images should be in jpeg file formats. Only files with sizes 

no greater then 4MB are supported. FollowMe TV

With your mobile device you can stream the current 

broadcast from your smart TV using the 

FollowMe 

TV

 feature. Install the appropriate Smart Center 

application to your mobile device. Start the application. 
For further information on using this feature refer to 

the instructions of the application you use.

Note:

 Depending on model, your TV may not support this 

function. The application may not be compatible with all mobile 

devices. UHD (4K, Ultra HD) channels are not supported and 

both of the devices must be connected to the same network.

CEC

This function allows to control the CEC-enabled 

devices, that are connected through HDMI ports by 

using the remote control of the TV.
The 

CEC

 option in the

 Settings>Devices

 menu should 

be set as 

Enabled

 at first. Press the 

Source

 button and 

select the HDMI input of the connected CEC device 

from the 

Sources List

 menu. When new CEC source 

device is connected, it will be listed in source menu 

with its own name instead of the connected HDMI ports 

name(such as DVD Player, Recorder 1 etc.).
The TV remote is automatically able to perform the 

main functions after the connected HDMI source has 

been selected. To terminate this operation and control 

the TV via the remote again, press and hold the “0-

Zero” button on the remote control for 3 seconds.
You can disable the CEC functionality by setting the 

related option under the

 Settings>Devices

 menu 

accordingly.
The TV supports ARC (Audio Return Channel). This 

feature is an audio link meant to replace other cables 

between the TV and an audio system (A/V receiver or 

speaker system).
When ARC is active, the TV will mute its other audio 

outputs, except the headphone jack, automatically 

and volume control buttons are directed to connected 

audio device. To activate ARC set the 

Sound Output 

option in the

 Settings>Sound

 menu as 

HDMI ARC

.

Note:

 ARC is supported only via the HDMI2 input.