F&U RCD9038BT, User Manual

4.If you want to stop storage device playback, just to press the STOP button 
on the unit or remote controller, and you can take away the storage device 
after playbackis stopped.  
P.S.: During the power on mode, Press the CD/MP3/USB/Card/BT. function 
witch, you can select different functions, details as below: CD/MP3 disc 
playback USB playback SD/MMC card playback 
Never take out the USB device or Memory card when it is being played,
other wise the memory in the device maybe deleted.

Radio Operation

1.Put the function switch button to Radio position
2.Push the band switch button to the band position you want to listen; 
LCD will display the current frequency you are listening.
3.Adjust the volume by the volume control button to your satisfactory level.
4.Turn the tuning knob to select your favourite channel. Note: when 
you are tuning the AM band, please turn the player direction, when you are 
tuning FM channels, please draw the antenna out to get the perfect reception
 effect.
 5.When you are receiving FM band, the LCD will show ST' letter if the 
channel is broadcasted in stereo format.

Remote Control Operation

1.Operation of programming
       

2.Menu +, Menu 
When playing mp3 discs, press Menu + button to play the next song under the
 same file, preen Menu  button to play the previous song under the same file.

When the playback is stopped, press the program button, the characters

on the LCD will flash, which means it is in the status of programming. See
 picture (5)Press previous button or next button or the number button on the 
remote control to select the songs you want to program, and then press the 
programmed button.In this way, that song will be stored. You can store more 
than 20 songs in this way in CD format, 99 songs in mp3 format. After the 
programming is finished, just  press the play button then the player will play 
in the programmed sequence. LCD will display like picture (6)During the 
programming process, press stop one time to stop programming, press stop 
two times to clear the programmed songs and escape the process of
 programming process.During the playback of programmed, press stop 
button two times to change to the normal playback process. The memory of 
programming will be invalid  when you turn to use another function of the
 player.

CD        

P

P01

CD        

P

0:05

PLAY

5.

6.