Operating with the remote control
1. The remote control must point at the remote sensor,
in order for the DVD player to function correctly.
2. The remote works best at a distance less than 5
meters and at an angle of up to +/-30
°
toward the front
of the unit.
3. Obstacles should not remain in between the remote
control and the remote sensor on the main unit.
Quick Starting Guide
1. Connecting to an External Power Source
Connect the power adapter (supplied with the player) to the side input plug and to a wall
outlet. Do not use any other device otherwise specified by your dealer.
2. Open the screen panel.
The screen panel of the portable DVD opens to a maximum 180
°
. And it can rotate 270
°
.
3. Press the bottom left corner button to open the disc cover.
4. Insert a Blu-ray disc/DVD with label side facing upward.
Align the center of the DVD disc with the center of the disc guide. Press gently down on
the DVD to snap the disc into place, and then close the disc cover.
5. Slide the power switch on the right side of the unit to power it on.
6. Press the ►II or@button on the unit to start playback.
In most cases, when you leave by the button, continue to be used by
►
11 or@ button.
The DVD player will immediately start rendering the DVD program.
When you want to stop, press the ■ button, it will return to the power-on logo.
6
