10
Installing the LK825**
▲
WARNING
To avoid fire or shock, follow all wiring instructions
carefully. Any electrical work not described in these
instructions should be done or approved by a licensed
electrician.
1.
Locate accessory mounting plate on bottom of fan.
Figure 1
Figure 2
Figure 3
Figure 4
2.
Install nut and nipple bracket assembly on the fan motor
nipple end before mounting the 5-light bowl.
3.
Mount 5-light bowl unit on accessory mounting plate
with 3 screws and 3 lockwashers provided.
4.
Locate white and blue wires labeled “FOR LIGHT”.
Connect white-to-white and blue-to-black wires with wire
nuts supplied.
CAUTION
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring must
be in accordance with National and Local codes and the
ceiling fan must be properly grounded as a precaution
against possible electrical shock.