background image

LIMITED LIFETIME MOTOR WARRANTY - If any part of your fan motor fails, due to a defect in materials or workmanship during 

1.

the lifetime of the original purchaser, Fanimation will provide the replacement part free of charge, when the defective fan is returned 

to our national service center.  Proof of purchase is required.  Customer shall be responsible for all costs incurred in the removal or 

reinstallation and shipping of the product for repairs or replacement.

ONE YEAR MOTOR LABOR WARRANTY - If your fan motor fails at any time within one year from the original purchase, due to defects 

2.

in materials or workmanship, labor to repair the motor will be provided free of charge at our national service center.  Purchaser will 

be responsible for labor charges after this one-year period.  Customer shall be responsible for all costs incurred in the removal or 

reinstallation and shipping of the product for repairs or replacement.

If any other part of your fan fails at any time within one year after original purchase, due to a defect in materials or workmanship, we will 

3.

repair, or replace, at our option, the defective part free of charge for parts and labor performed at our national service center.

Because of varying climate conditions, this warranty does not cover changes in the finish, including rusting, pitting, corroding, tarnishing, 

4.

or peeling.

This warranty is void and does not apply to damage from improper installation, neglect, accident, misuse, exposure to extremes of heat 

5.

or humidity, or as a result of any modification to the original product.

All costs of removal and reinstallation of the fan are the sole responsibility of the owner of the fan and not the store that sold the fan 

6.

or Fanimation.

Fanimation reserves the right to modify or discontinue any product at any time and may substitute any part under this warranty.

7.

Under no circumstances may a fan be returned without prior authorization from Fanimation.  The receipt of purchase must accompany 

8.

authorized returns and must be sent freight prepaid to Fanimation.  The fan to be returned must be properly packed to avoid damage 

in transit; Fanimation will not be responsible for any damage resulting from improper packaging.

It is understood that any repair or replacement is the exclusive remedy available from Fanimation.  There is no other expressed or 

9.

implied warranty.  Fanimation hereby disclaims any and all implied warranties, including, but not limited to those of merchantability and 

fitness for a particular purpose to the extent permitted by law.  Some states do not allow limitations on implied warranties.  Fanimation 

will not be liable for incidental, consequential, or special damages arising out of or in conjunction with product use or performance, 

except as may otherwise be accorded by law.  This warranty gives you special legal rights and you may also have other rights that 

vary from state to state.

A certain amount of wobble is normal and should not be considered a problem or a defect.

10.

LIMITED LIFETIME WARRANTY

Important Safety Instructions

WARNING: To avoid fire, shock and serious personal injury, follow these instructions.

Read your owner’s manual and safety information before installing your new fan.  Review the accompanying assembly diagrams.

1.

Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power 

2.

from being switched on accidentally.  When the service disconnecting means cannot be locked, securely fasten a warning device, 

such as a tag, to the service panel.

Be careful of the fan and blades when cleaning, painting, or working near the fan.  Always turn off the power to the ceiling fan 

3.

before servicing.

Do not insert anything into the fan blades while the fan is operating.

4.

Do not operate reversing switch until fan blades have come to a complete stop.

5.

Additional Safety Instructions

To avoid possible shock, be sure electricity is turned off at the fuse box before wiring, and do not operate fan without blades.

1.

All wiring and installation procedures must satisfy National Electrical Codes (ANSI/ NFPA 70) and Local Codes.  The ceiling fan 

2.

must be grounded as a precaution against possible electrical shock.  Electrical installation should be made or approved by a licensed 

electrician.

The fan base must be securely mounted and capable of reliably supporting at least 35 lbs.  See page 4 of owner’s manual for support 

3.

requirements.  Consult a qualified electrician if in doubt.

The fan must be mounted with the fan blades at least 7 feet from the floor to prevent accidental contact with the fan blades.

4.

Follow  the  recommended  instructions  for  the  proper  method  of  wiring  your  ceiling  fan.    If  you  do  not  have  adequate  electrical 

5.

Use only with light kits marked suitable for use in dry locations.

6.

knowledge or experience, have your fan installed by licensed electrician.

WARNING:

  This product is designed to use only those parts supplied with this product and/or accessories designated specifically for 

use with this product.  Using parts and/or accessories not designated for use with this product could result in personal injury or property 

damage.

WARNING:

  To reduce the risk of personal injury, do not bend the blade bracket (flange or blade holder) when installing the brackets, 

balancing the blades, or cleaning the fan.  Do not insert foreign objects in between rotating fan blades.

WARNING:

  To Reduce The Risk Of Fire Or Electric Shock.  Do Not Use This Fan With Any Solid-State Speed Control Device.

WARNING:

 

WARNING:  

To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any Solid-State Speed Control Device.

 To Reduce The Risk Of  Electric Shock.  Disconnect The Electrical Supply Circuit To The Fan Before Installing Light Kit.

Extends to the original purchaser of a Fanimation fan from an authorized Fanimation dealer/retailer only

Table of Contents

4

5

5

6

8

9

11

11

12

Unpacking Instructions. . . . . . . . . . . . . . . . . . . . . .  . . . . . . . .  

Energy Efficient Use of Ceiling Fans . . . . . . . . . . . . . . . .  . . . 

Electrical and Structural Requirements. . . . . . . . . . . . . . . . . .  

How to Assemble Your Ceiling Fan. . . . . . . . . . . . . . . . . . . . .  

How to Hang Your Ceiling Fan . . . . . . . . . . . . . . . . . . . . . . . .

How to Wire Your Ceiling Fan . . . . . . . . . . . . . . . . . . . . . . . . . 

How to Install Your Canopy Housing . . . . . . . . . . . . . . . . . .

How to Assemble Your Ceiling Fan Blades . . . . . . . . . . . . .

How to Assemble Your  Switch Cup Assembly/Light Kit . . 

14

15

16

16

17

18

19

20

How to Operate Your Ceiling Fan. . . . . . . . . . . . . . . . . . . . . .

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  

How to Clean Your Ceiling Fan Blades . . . . . . . . . . . . . . . . .      

FP6284 Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

FP6284 Exploded-View Illustration. . . . . . . . . . . . . . . . . . . . .

FP6285B Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

FP6285B Exploded-View Illustration. . . . . . . . . . . . . . . . . . . .  

Summary of Contents for AIRE DELUXE FP6284 SERIES











































Reviews: