8
6.
Re-assemble the upper housing cover and motor
coupler washer as shown. (Figure 6)
Motor Coupler
Washer
Upper Housing
Cover
7.
Securely tighten the six screws that were previously
removed in Step 3 on the motor assembly. (Figure 7)
Motor
Assembly
Figure 7
How to Assemble Your Ceiling Fan Blades (Continued)
Figure 6
1.
Remove the hanger ball portion from the downrod/
hanger ball assembly by loosening the set screw in
the hanger ball until the ball falls freely down the
downrod. Remove the pin from the downrod, then
remove the hanger ball. Retain the pin and hanger
ball for reinstallation in Step 6. (Figure 1)
Figure 1
2.
Remove the hairpin clip and clevis pin from the
bottom of the downrod. Retain the pin and clip for
reinstallation in Step 4. (Figure 2)
Figure 2
Hairpin
Clip
Clevis Pin
How to Assemble Your Ceiling Fan
Pin
Downrod
Set Screw
Hanger Ball
