7
3.
Remove the six preassembled screws of the motor
coupler washer from the motor assembly, then retain
the screws for reinstallation in Step 7. (Figure 3)
4.
Lift away the motor coupler washer and upper
housing cover from the motor assembly and set aside.
(Figure 4)
Figure 3
Figure 4
Motor Assembly
Motor Assembly
Motor Coupler
Washer
Upper Housing
Cover
How to Assemble Your Ceiling Fan Blades
Figure 1
1.
Remove the four stabilizer tabs and plastic bag
from the motor. Discard the stabilizer tabs. (Figure 1)
Motor
Assembly
Stabilizer
Tabs
Motor
Assembly
Downrod Support
2.
Remove the two set screws and locking nuts of the
downrod support from the motor assembly then retain
the screws and nuts for
How to Assemble Your
Ceiling Fan
, Step 4. (Figure 2)
Figure 2
