6
How to Assemble Your Ceiling Fan (cont’d)
6.
While pulling up on the hanger ball, securely tighten
the two 3/16-24 x 3/8
˝
setscrews in the downrod support.
(Figure 3)
7.
The fan comes with blue, black, and white leads. Before
installing fan, measure up approximately 6-9 inches above
top of Downrod/Hanger Ball Assembly. Cut off excess wire
and strip back insulation ½
˝
from end of wire.
8.
You have now completed the upper assembly of your
new ceiling fan. You can now proceed with the hanging
and the electrical wiring of your fan.
Ceiling
Canopy
Downrod/Hanger
Ball Assembly
Figure 4
