The Americana
®
Fan Assembly
INSTALLATION REQUIREMENTS:
3/4
˝
plywood wall backing able to support at least 100 lbs. is required. Three 5/16
˝
lag bolts are used to secure the fan
base to the 3/4
˝
plywood backing. Ceiling backing to be supplied by owner or contractor. Not recommended for Damp
Location areas.
ELECTRICAL REQUIREMENTS:
Surface mounted electrical junction box centered in mounting location, and grounded electrical supply line of 120 volts
AC, 60 Hz, 15 amp circuit. 220 VAC, 50 Hz export version available (Antique Brass only). Reversible switch and 3-speed
pull-chain included.
FAN SPEEDS:
Will vary according to the blade set. Material, shape, and size of fan blade will affect the speed of the fan. In general,
the larger blades will turn slower than the smaller blades and the narrower blades (narrow oval & oar shaped) will turn
faster than the wide oval blades.
LIGHTING OPTIONS:
Optional lighting
fi
tters and light kits are available, including a single bowl
fi
xture with a maximum of 180 watts and a
variety of four-light
fi
xtures with a maximum of 240 watts. See Catalog or visit our website, www.fanimation.com for more
lighting options.
CONTROL OPTIONS:
Optional controls are: C1 or C2 wall controls; C4 remote control with canopy receiver; SW50 switch cap receiver with
C20 remote and/or C21 wall control.
BLADE OPTIONS:
Blade sets consist of 5 blades. Mounting four blades is an option and will increase speed and air
fl
ow. Various Palm,
Bamboo, and Wood blades are available. See Catalog or visit our website, www.fanimation.com for more blade
selections.
10983 Bennett Parkway
Zionsville, IN 46077
Toll Free (888) 567-2055
FAX (866) 482-5215
Outside U.S. call (317) 733-4113
Visit Our Website www.fanimation.com
Ordering Information
Catalog No.
Description
FP410
¾¾
Short Fan Assembly
FP420
¾¾
Long Fan Assembly
FP1018
Reversible Oak/Walnut Blade Set
(sold seperately)
Short Fan Assembly - FP410
¾¾
Overall Height (w/o Light Kit)
25
˝
Blade Sweep
52
˝
Base Diameter
16¾
˝
Mounting Diameter (3-hole; centerline)
13
˝
Weight: (w/o Light Kit)
32 lbs
Long Fan Assembly - FP420
¾¾
Overall Height (w/o Light Kit)
39
˝
Blade Sweep
52
˝
Base Diameter
16¾
˝
Mounting Diameter (3-hole; centerline)
13
˝
Weight: (w/o Light Kit)
41 lbs
¾¾
Available Finishes
AB
Antique Brass
BL
Black
Dimensions shown in inches
Dimensions shown in inches
Copyright 2007 Fanimation, Inc.
2007/12
