14
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not operate
fan until the blades are in place. Noise and fan damage
could result.
How to Operate Your Ceiling Fan
1.
Restore electrical power to the outlet box by turning
the electricity on at the main fuse box. (Figure 1)
3.
Check the operation of the fan by gently pulling on
the fan pull chain. (Figure 3)
Fan Pull Chain Operating Sequence
1
st
Pull
High
2
nd
Pull
Medium
3
rd
Pull
Low
4
th
Pull
Off
Figure 1
Figure 2
Figure 3
Figure 4
4.
Slide the switch to "CH" when use the pull chain to
operate the fan. Slide the switch to "RC" to operate the
fan using the optional CR500 remote control—sold
separately. (Figure 4)
2.
Install the fan pull chain and light kit pull chain.
(Figure 2)
Switch Housing
Assembly
Fan Pull Chain
Fan Pull
Chain
Light Kit Pull Chain