11
Trouble Shooting
▲
WARNING
For your own safety turn off power at fuse box or circuit breaker before trouble shooting your fan.
Trouble
Probable Cause
Suggested Remedy
1. FAN WILL NOT START
1.
Fuse or circuit breaker blown.
2.
Loose power line connections to the fan, or loose
switch wire connections in the switch housing.
1.
Check main and branch circuit fuses or circuit
breakers.
2.
Check line wire connections to fan and switch wire
connections in the switch housings.
CAUTION: Make sure main power is turned off !
2. FAN SOUNDS NOISY
1.
Loose screws in motor housing.
2.
Screws securing fan blade are loose.
3.
Pulley set screw loose.
4.
Rivets (on belt) make clicking sound.
1.
Check to make sure all screws in motor housing are
snug (not over-tight).
2.
Check to make sure the screws which attach the fan
blade to the are tight..
CAUTION: Make sure main power is turned off !
3.
Tighten set screw securely.
4.
Not considered a defect.
3. FAN WOBBLES
EXCESSIVELY
1.
Fan / Motor base lag bolts on the ceiling is loose.
2.
Blade holders not seated properly.
1.
Tighten lag bolts securely.
2.
Check to be sure the fan blade holders seat firmly
and uniformly to the surface of the hub. If holders are
seated incorrectly, loosen the screws retighten.
