11
Light Kit Assembly—FP8016**-220 ONLY
1. Install included G9-halogen bulb into the socket.
(Figure 22)
Figure 22
3. Install pull chains and fobs. (Figure 24)
Figure 24
Figure 23
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before
installing light kit.
Use only with light kits marked suitable for use in
Wet Locations.
CAUTION
2. Loosen the three thumb screws provided on the rim
of the light kit so the lip of the glass can be raised up into
the light kit. (Figure 23)
