Fanimation FP8000-220 The Akira, Owner'S Manual

10

How to Assemble the Blades and Light Kit (continued)

LIGHT SOCKET PLATE

LIGHT SOCKET 2-PIN

CONNECTOR

Figure 20

SCREWS (3)

LIGHT SOCKET

PLATE

Figure 21

4.

Connect  the  2-pin  connector  from  the  light  socket

plate  to  2-pin  connector  from  motor  assembly

(Figure 20).

6.

Insert light bulbs into sockets (Figure 22 A).

6A.

Don’t install the light bulbs if you want to install

the lower steel cap in Step 7A (Figure 22 B).

7.

5.

Remove  one  of  the  three  screws  in  the  housing

light  kit  assembly.  Slightly  loosen  the  remaining

two screws. Assemble the light socket plate to the

housing light kit assembly using the two key slots.

Replace  the  third  screw  and  securely  tighten  all

three screws (Figure 21).

MOTOR ASSEMBLY

2-PIN CONNECTOR

HOUSING LIGHT

KIT ASSEMBLY

Assemble the opal frosted glass to the adapter 

plate assembly by twisting in a clockwise direction.

Do not over-tighten (Figure 23 A) 

7A.

Assemble the lower steel cap to the  adapter plate

assembly by twisting in a clockwise direction. 

(Figure 23 B).

60-WATT G50

LIGHT BULBS (2)

LIGHT

SOCKET

LIGHT

SOCKET

Figure 22A

Figure 23 A

Figure 23 B

FROSTED

GLASS

OPAL

LOWER

STEEL

CAP ASSEMBLY

Figure 22 B