11
How to Operate Your Ceiling Fan
REVERSE
SWITCH
COUPLING
COVER
Figure 26
3.
If airflow is desired in the opposite direction, turn
the fan off and wait for the blades to stop turning.
Slide the coupling cover up to expose the reverse
switch. Then slide the reverse switch on top of
motor assembly to the opposite position and turn
fan on again (Figure 26).
Reverse Switch Information
Season
Rotation Direction Switch Position
Summer
Counter-Clockwise
Left
Winter
Clockwise
Right
Maintenance
1.
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed. When cleaning, use
only a soft brush or lint free cloth to avoid
scratching the finish. Abrasive cleaning agents are
not required and should be avoided to prevent
damage to finish.
Do not use water when cleaning your ceiling fan.
It could damage the motor or the finish and create
the possibility of electrical shock.
CAUTION
Periodic light dusting of the blades is recommended.
A feather duster will work best.
How to Clean Your Ceiling Fan Blades
Avoid using water, cleansers, or harsh rags, which
can warp and ruin the finish.
MAIN FUSE BOX
Figure 24
Figure 25
1.
Restore electrical power to the outlet box by turning
the electricity on at the main fuse box (Figure 24).
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until the blades are in place. Noise and
fan damage could result.
WARNING
2
. To make fan operational, install 12-volt 23 A battery
in hand-held remote transmitter, (if not using for
long periods of time, remove battery to prevent
damage to tran smi tt er) . St or e the remote away
from excessive heat or humidly (Figure 25).
Summary of Contents for FP8000-220 The Akira
Page 15: ......
