10
How to Assemble the Blades and Light Kit (continued)
MOTOR ASSEMBLY
2-PIN CONNECTOR
SOCKET PLATE ASSEMBLY
SOCKET PLATE 2-PIN
CONNECTOR
Figure 20
ADAPTER PLATE
ASSEMBLY
SOCKET PLATE ASSEMBLY
SCREWS (3)
Figure 21
LIGHT BULBS (2)
LIGHT
SOCKET
LIGHT
SOCKET
Figure 22 A
4.
Figure 23 A
Figure 23 B
5.
Connect the 2-pin connector from the socket plate
assembly to 2-pin connector from motor assembly
(Figure 20).
Remove one of the three screws in the socket
plate assembly. Slightly loosen the remaining
two screws. Assemle the socket plate
assembly to the adapter plate assembly using
the two key slots. Replace the third screw and
securely tighten all three screws (Figure 21).
FROSTED
GLASS
OPAL
LOWER
STEEL
CAP ASSEMBLY
6.
Insert light bulbs into sockets (Figure 22 A).
6A.
Don’t install the light bulbs if you want to install
the lower steel cap in Step 7A (Figure 22 B).
7.
Assemble the opal frosted glass to the adapter
plate assembly by twisting in a clockwise direction.
Do not over-tighten (Figure 23 A)
7A.
Assemble the lower steel cap to the adapter plate
assembly by twisting in a clockwise direction.
(Figure 23 B).
Figure 22 B
Summary of Contents for FP8003-220 The Benito
Page 15: ......
