4
How to Assemble Your Floor Fan
x 12
3/16-24 x 22 mm
CAP HEAD WITH
SPRING WASHER
HARDWARE USED:
Motor Assembly
Leg
T-Wrench
1.
Attach the timber tripod legs to the motor
assembly using 3/16-24 x 22 mm screws. Use the
supplied T-wrench to tighten the screws to ensure
the legs are securely attached to the motor assembly.
Ensure legs are positioned with the sticker side facing
inwards towards the mounting brackets. Do not
over-tighten the screws. (Figure 1)
4.
Select the desired airflow, located on back of motor
assembly by rotating switch clockwise. (Figure 4)
3.
You have now completed the assemby of your
fan. Plug cord directly into the wall socket and
turn on the power supply. (Figure 3)
Figure 3
Rubber Cap
2.
Assemble the rubber caps on to the screws of
each leg. (Figure 2)
Figure 2
Rotating Switch
Figure 4
Figure 1
0 = OFF
1 = HIGH
2 = MEDIUM
3 = LOW
Summary of Contents for FP8014**-220
Page 6: ......
