Fanimation FP8014 Series, Owner'S Manual

4

Electrical and Structural Requirements

How to Assemble Your Floor Fan

▲

WARNING

To  avoid  fire  or  shock,  follow  all  wiring  instructions 

carefully.    Any  electrical  work  not  described  in  these 

instructions should be done or approved by a licensed 

electrician.

ELECTRICAL  REQUIREMENTS

Table  /  Wall  fan  requires  a  grounded  electrical  supply 

line of 120 volts AC, 60 Hz, 15 amp circuit.  8 ft power 

cord included.  NOT for Damp Location Use.

▲

WARNING

To Avoid Fire Or Electrical Shock, Do NOT Use This Fan 

With Any Solid-State Speed Control Device And Do NOT 

Use By Open Window.

x  12

3/16-24  x12mm 

SCREWS

HARDWARE USED:

Figure 1 

Motor Assembly

Leg

1. 

Assemble the leg to the motor assembly  

with 3/16-24 x 12mm screws.

Make sure all screws securing tight the leg

with motor assembly. (Figure 1)  

2. 

You have now completed the assemby of your 

fan. Plug cord directly into the socket. (Figure 2)

3. 

Select the desired airflow, located on back of motor

assembly by rotating switch clockwise. (Figure 3)      

Figure 2

Rotating Switch

Figure 3