Fanimation HF7000 Series, Owner'S Manual

Installing the Canopy Housing

1.

 Screw in two threaded rods into the Hanger Bracket 

(Figure 1).

NOTE:

 The threaded rods in the hanger bracket serve as 

guides for easier installation.

2.

 Securely attach the Canopy Housing to the Hanger 

Bracket using the external lock washers and knurled knobs 
supplied with your fan (Figure 2).

Figure 1

NOTE:

 Supply wires and 

fan wires omitted for clarity. 

NOTE:

 This step is applicable 

after

 the necessary wiring 

is completed. (see page 9) 

▲

WARNING

To avoid possible fire or shock, make sure that the 

electrical wires are completely inside the canopy housing 

and not pinched between the housing and the ceiling.

Figure 2

10

Assembling and Mounting the Fan Blades

1.

 Lay blade holder with the threaded posts facing up.  

2.

 Position the wood blade over the blade holder with the 

threaded posts showing through the holes of the blade. 

3.

 With a Phillips screwdriver, tighten washer-head screws 

with fiber washers. (Figure 1)

4. 

Attach assembled blades and blade holders to the motor 

hub using the provided screws.

(Figure 2)

5. 

Make sure the screws securing the blade holders to the 

motor hub are tight and that the blade holders are properly 
seated.

INSTALLATION NOTE

Do not connect fan blades until the fan is completely 

installed. Installing the fan with blades assembled may 

result in damage to the fan blades.

▲

WARNING

To reduce the risk of personal injury, do not bend the 

blade holders when installing, balancing the blades or 

cleaning the fan. Do not insert foreign objects in between 

the rotating blades.

Figure 1

Figure 2