11
Light Kit
Light Kit
Figure 4
Motor
Assembly
4.
Assemble the light kit to the support bracket using
the two key slots in the light kit. Replace the previously
removed screw and securely tighten all three screws.
(Figure 4)
How to Assemble Your Light Kit or Cap (Continued)
LED
Assembly
6.
Connect the 2 single pin connectors from the LED
assembly to the 2 single pin connectors from motor
assembly. (Figure 6)
CAUTION
To reduce the risk of electric shock, disconnect the
electrical supply circuit to the fan before installing
your light kit.
Figure 8
Light Kit
Light Kit
LED Assembly
CAUTION
The light source is designed for this specific
application and can overheat if serviced by untrained
personnel. If any servicing is required, the product
should be returned to an authorized service facility
for examination or repair.
Figure 5
Glass
8.
Secure the glass to light kit by twisting in a
clockwise direction. Twist the glass gradually
until it
snaps onto the light kit.
Do not over-tighten.
(Figure 8)
Figure 6
Figure 7
Option B--for use with light kit
5.
Remove the three screws in the light kit and retain
the screws for later. (Figure 5)
7.
Assemble the LED assembly to the light kit using
the previously removed screws and secure all three
screws. (Figure 7)
Summary of Contents for KWARTET FPS8553 Series
Page 17: ......