How to Hang and Wire Your Ceiling Fan (Continued)
9
Figure 1
How to Assemble Your Ceiling Fan
Ceiling Bracket
Assembly
Wide Notch
Wide Tab
Motor
Assembly
10.
Attach the safety cable to ceiling support cable.
Slide cable clamp onto safety cable (from fan). Place
the end of cable through the loop of ceiling support
cable. Pull as much cable through loop as possible.
Feed end of cable into clamp hole and firmly tighten
screw (Figure 9). Cut off excess safety cable.
Figure 9
NOTE:
Supply wires and
fan wires omitted for clarity
Motor
Assembly
Safety Cable
Ceiling Support
Cable
Attach the safety cable
to ceiling support cable
HARDWARE USED:
Ceiling Support
Cable Clamp
W/Screw
x 1
1.
Align the wide tab of motor assembly to the wide
notch of ceiling bracket. Carefully secure the motor
housing onto the mounting slots on ceiling bracket
by twisting in a clockwise direction. Be sure the
receiver and all wiring are tucked into the motor
housing and is not pinched. Once the motor assembly
is flush with your ceiling, replace the previously
removed screws and securely tighten all three screws.
(Figure 1)
Summary of Contents for KWARTET FPS8553 Series
Page 17: ......