3/16˝-24 Screw with
Fiber Washer
(3 per blade)
x 15
x 15
FIBER WASHER
SCREWS
HARDWARE USED:
3/16
˝
-24
▲
WARNING
To reduce the risk of personal injury, do not bend the
blades when installing, balancing or cleaning the fan.
Do not insert foreign objects in between the rotating
blades.
7
How to Assemble
Your Ceiling Fan Blades
Figure 1
Figure 2
Figure 3
Figure 4
Blade
Motor Assembly
Motor Assembly
Upper Housing
Cover
3.
Remove the motor coupler washer and upper
housing cover from the motor assembly. (Figure 3)
1.
Remove the two preassembled screws of the
downrod support from the motor assembly then retain
the screws for How to Assemble Your Ceiling Fan,
Step 4. (Figure 1)
2.
Remove the six preassembled screws of the motor
coupler washer from the motor assembly, then retain
the screws for Step 6. (Figure 2)
Motor Coupler
Washer
Motor Coupler
Washer
Downrod Support
4.
Slide the blade through the slot in the motor
assembly and position blade over the motor assembly
with threaded posts showing. Make sure the bottom
edge of the blade is fully seated against the flywheel
of motor assembly. Tighten washer-head screws with
fiber washers to secure the blade to the flywheel of
motor assembly. (Figure 4)