background image

1. LIMITED  LIFETIME  MOTOR  WARRANTY  -  If  any  part  of  your  fan  motor  fails,  due  to  a  defect  in  materials  or  workmanship

during the lifetime of the original purchaser, Fanimation will provide the replacement part free of charge, when the defective
fan  is  returned  to  our  national  service  center.  Proof  of  purchase  is  required.  Customer  shall  be  responsible  for  all  costs
incurred in the removal or reinstallation and shipping of the product for repairs or replacement.

2. ONE YEAR MOTOR LABOR WARRANTY - If your fan motor fails at any time within one year from the original purchase, due

to  defects  in  materials  or  workmanship,  labor  to  repair  the  motor  will  be  provided  free  of  charge  at  our  national  service
center.  Purchaser  will  be  responsible  for  labor  charges  after  this  one-year  period.  Customer  shall  be  responsible  for  all
costs incurred in the removal or reinstallation and shipping of the product for repairs or replacement.

3. If  any  other  part  of  your  fan  fails  at  any  time  within three years after original purchase, due to a defect in materials or 

workmanship, we will repair, or replace, at our option, the defective part free of charge for parts and labor performed at our
national service center.

5. Because  of  varying  climate  conditions,  this  warranty  does  not  cover  changes  in  the  finish,  including  rusting,  pitting,

corroding, tarnishing, or peeling.

6. This  warranty  is  void  and  does  not  apply  to  damage  from  improper  installation,  neglect,  accident,  misuse,  exposure  to

extremes of heat or humidity, or as a result of any modification to the original product.

7. All  costs  of  removal  and  reinstallation  of  the  fan  are  the  sole  responsibility  of  the  owner  of  the  fan  and  not  the  store  that

sold the fan or Fanimation.

4. If any other part of  your light kit fails at any time within five years after original purchase, due to a defect in materials or
    workmanship, we will repair, or replace, at our option, the defective part free of charge for parts and labor performed at our 
    national service center.     

Extends to the original purchaser of a Fanimation fan from an authorized Fanimation dealer/retailer only

10. It is understood that any repair or replacement is the exclusive remedy available from Fanimation. There is no other

expressed  or  implied  warranty.  Fanimation  hereby  disclaims  any  and  all  implied  warranties,  including,  but  not  limited  to
those  of  merchantability  and  fitness  for  a  particular  purpose  to  the  extent  permitted  by  law.  Some  states  do  not  allow
limitations on implied warranties. Fanimation will not be liable for incidental, consequential, or special damages arising out
of or in conjunction with product use or performance, except as may otherwise be accorded by law. This warranty gives you
special legal rights and you may also have other rights that vary from state to state.

11. A certain amount of wobble is normal and should not be considered a problem or a defect.

9. Under no circumstances may a fan be returned without prior authorization from Fanimation. The receipt of purchase must

accompany  authorized  returns  and  must  be  sent  freight  prepaid  to  Fanimation.  The  fan  to  be  returned  must  be  properly
packed to avoid damage in transit; Fanimation will not be responsible for any damage resulting from improper packaging.

8. Fanimation  reserves  the  right  to  modify  or  discontinue  any  product  at  any  time  and  may  substitute  any  part  under  this

warranty.

Unpacking Instructions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Energy Efficient Use of Ceiling Fans . . . . . . . . . . . . . . . . . . . . .5
Electrical and Structural Requirements  . . . . . . . . . . . . . . . . . .5
How to Assemble Your Ceiling Fan . . . . . . . . . . . . . . . . . . . . . .7
How to Hang Your Ceiling Fan . . . . . . . . . . . . . . . . . . . . . . . . . .9
How to Wire Your Ceiling Fan . . . . . . . . . . . . . . . . . . . . . . . . . 10
How to Install Your Canopy Housing  . . . . . . . . . . . . . . . . . . . 11
How to Assemble Your Ceiling Fan Blades . . . . . . . . . . . . . . .

How to Assemble Your Light Kit Assembly or Cap. . . . . . . . 
How to Operate Your Ceiling Fan  . . . . . . . . . . . . . . . . . . . . . .14

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

How to Install Your Remote Control . . . . . . . . . . . . . . . . . . . . 16

How to Clean Your Ceiling Fan Blades. . . . . . . . . . . . . . . . . . .16
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Parts List  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Exploded-View Illustration  . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Table of Contents

.13

12

LIMITED LIFETIME WARRANTY

Summary of Contents for SLINGER LP8147SLBN









































Reviews: