16
How to Install Your Remote Control
Figure 1
1.
Installing Wall Holder:
(Figure 1)
Attach wall holder using the two provided screws.
Maintenance
How to Clean Your Ceiling Fan Blades
Periodic light dusting of the blades is recommended.
A feather duster will work best.
Avoid using water, cleansers, or harsh rags, which can
warp and ruin the blades.
CAUTION
Do not use solvents when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of electrical shock.
RECOMENDED:
Periodically check that the blade holders to motor hub screws are secure and tight.
Season
Summer
Winter
Rotation Direction Switch Position
Clockwise
Counterclockwise
Reverse Switch Information
Right
Left
6.
If airflow is desired in the opposite direction, turn
the fan off and wait for the blades to stop turning.
Then slide the reverse switch on top of motor
assembly to the opposite position and turn fan on
again. (Figure 6 )
Reversing
Switch
Figure 6
How to Operate Your Ceiling Fan (continued)
Screws (2)
Wall Holder
1.
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed. When cleaning, use only
a soft brush or lint free cloth to avoid scratching the
finish. Abrasive cleaning agents are not required and
should be avoided to prevent damage to finish.
