background image

1. GENERAL SAFETY RULES & WARNINGS

•  PLEASE READ INSTRUCTIONS CAREFULLY.

•  PLACE INSTRUCTION MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE. DO NOT ALLOW 

ANYONE WHO HAS NOT READ THESE INSTRUCTIONS TO ASSEMBLE, ADJUST OR OPERATE THIS 

APPLIANCE.

•  IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE OR EXPLOSION 

MAY RESULT IN CAUSING PROPERTY DAMAGE, SERIOUS INJURY OR LOSS OF LIFE.

•  FAILURE TO COMPLY WITH THE PRECAUTIONS AND INSTRUCTIONS PROVIDED WITH THIS 

APPLIANCE, CAN RESULT IN DEATH, SERIOUS INJURY AND PROPERTY LOSS OR DAMAGE FROM 

HAZARDS OF FIRE, EXPLOSION, BURN, ASPHYXIATION, AND/OR ELECTRICAL SHOCK.

•  ONLY PERSONS WHO CAN UNDERSTAND AND FOLLOW THE INSTRUCTIONS SHOULD USE OR 

SERVICE THIS APPLIANCE. IF YOU NEED ASSISTANCE OR REQUIRE INFORMATION SUCH AS AN 

INSTRUCTION MANUAL, LABELS, ETC. CONTACT FANMASTER.

•  DO NOT STORE OR USE GASOLINE, PETROL OR ANY OTHER FLAMMABLE OR COMBUSTIBLE 

VAPORS AND LIQUIDS IN THE VICINITY OF THIS APPLIANCE.

•  THE ELECTRICAL SYSTEM TO WHICH THE APPLIANCE IS CONNECTED MUST COMPLY WITH 

LOCAL REGULATIONS. A RESIDUAL-CURRENT DEVICE (RCD) MUST BE INSTALLED. 

•  UNPLUG THE APPLIANCE BEFORE PERFORMING ANY MAINTENANCE OPERATIONS.

•  ALWAYS CHECK THE POWER CABLE BEFORE USING THE APPLIANCE. IT MUST NOT BE BENT, 

TAUT, STRETCHED, CRUSHED OR ANY WAY DAMAGED.

•  IF THE POWER CORD AND/OR PLUG IS DAMAGED, IT MUST BE REPLACED BY FANMASTER, A 

SERVICE AGENT OR A QUALIFIED PERSONS.

•  DO NOT LEAVE THE APPLIANCE UNATTENDED WHEN IN USE.

•  NEVER USE THE APPLIANCE WITH WET HANDS OR WHEN EITHER THE APPLIANCE OR THE POWER 

CABLE IS WET.

•  CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE APPLIANCE.

•  THE APPLIANCE IS NOT INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN) WITH 

REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES, OR LOCK OF EXPERIENCE & 

KNOWLEDGE.

•  PLEASE MAKE SURE ALL PLASTIC PACKAGING IS REMOVED FROM ALL FITLERS BEFORE 

OPERATION.

•  THIS APPLIANCE CONTAINS A UV EMITTER. DO NOT STARE AT THE LIGHT SOURCE.

•  DO NOT USE AN ADAPATER WITH THIS APPLIANCE.

•  BREATHING HAZARD - WHEN USING THIS APPLIANCE IN A CONTAINMENT AREA, ALWAYS 

TURN OFF POWER TO OPEN COMBUSTION APPLIANCES SUCH AS FIREPLACES, FURNACES, 

WATER HEATERS & HVAC SYSTEMS TO AVOID THE RISK OF BACK-FLOW CARBON MONOXIDE 

FUMES.

•  IF THE FILTER CHANGE LIGHT ILLUMINATES DURING THE REMEDIATION PROCESS, IMMEDIATELY 

CHANGE THE HEPA/ACTIVATED CARBON FITLER.

•  TIPPING HAZARD - ONLY STACK THIS UNIT IN STORAGE, NOT IN USE. DO NOT STACK MORE 

THAN TWO (2) UNITS ON TOP OF EACH OTHER.

•  THIS APPLIANCE IS NOT DESIGNED TO BE CONTINUOUSLY USED 24 HOURS 7 DAYS A WEEK AS 

IT WILL SHORTEN THE PRODUCT LIFE.

FOR YOUR INFORMATION

Summary of Contents for Masterfilter ASP-500-MF2













Reviews: