Fanmaster Masterfilter ASP-500-MF2, Instruction Manual

4. HOW IT WORKS

6. ASSEMBLY & OPERATING INSTRUCTIONS

ASSEMBLY

There is minimal assembly required. 

REMOVE PLASTIC PACKAGING FROM FILTERS

 - 

open the cover via releasing the two (2) latches and remove the plastic packaging 

from all filters. 

Failure to do so will cause risks or damage to the appliance. The 

appliance will not work. 

OPERATING INSTRUCTIONS

1. Place the appliance so that it is in an upright vertical position (placed on the 

rubber feet).

2. Connect the plug to the relevant power source.

3. Open the air inlet cover on the opposite side of the control panel (filters)

4. Turn the appliance on by turning the Variable Speed Control.

5. To turn appliance off turn the Variable Speed Control anti-clockwise.

Remove the appliance from the carton. If the appliance is damaged, please 

contact Fanmaster or where you purchased the appliance from.

CONTROL PANEL

Variable Speed Control

 - controls the air flow (clockwise to increase)

Hour Meter

 - indicates the running time of the unit

UVC On/Off

 - controls the UV-C Lamp

Change HEPA Filter

 - indicates when to replace/clean the HEPA Filter