5. CLEANING, MAINTENANCE & STORAGE
4. ASSEMBLY & OPERATING INSTRUCTIONS - CON
•
Before starting any maintenance task, shut down, unplug and let the heater cool
down for at least 15 minutes.
•
Do not attempt any electrical repair yourself. If the heater needs service or repair,
contact Fanmaster or a qualified person.
•
When cleaning, make sure that water does not enter the unit.
• Do not open the enclosure to clean the inner parts. Do not spray water into the
heater.
•
Never use solvents, gasoline, toluene and similar aggressive chemicals to clean
the heater.
Regularly wipe the enclosure using a soft sponge or cloth. For very dirty parts, use a
sponge wetted with lukewarm water and a mild detergent, then dry using a clean
cloth. Regularly inspect the power cable: if worn, cracked or damaged have it
replaced by a qualified persons only.
Before storing the heater, make sure it is perfectly cool and dry. Cover the unit with a
blanket or tarp and store it in a dry, ventilated place.
