Model 686CS Instruction Manual
D00312132
Revision F, October 2015
8
2
Safety
This blender is similar to any mixing blender and does not present any unusual
hazards.
Follow these recommended safety practices:
1.
The operator should always wear safety glasses in case the mixture splatters
when adding ingredients.
2.
The operator should not drop any foreign objects in the container while mixing
is occurring. These foreign objects could strike the operator or damage the
mixing blades and container.
3.
The Model 686CS should be plugged in to a properly grounded outlet with the
ground prong in place.
4.
Do not use extension cords.
5.
Always remove the plug from the receptacle before performing any work on the
mixer base.
6.
Do not immerse the mixer in any fluid or spray it with any fluids.
7.
The blender should be at a comfortable height for the operator. The operator
should be able to add ingredients without straining to reach the mixer. Also, the
mixer should be close enough to shut it off quickly if necessary.
8.
The mixing cup should be cleaned thoroughly after use to prevent the buildup
of cement or other deposits. These deposits can cause accelerated wear of
components. The mixing blades should be checked daily for damage. Damaged
or worn blades should be replaced immediately.
