Fanotec F9988 Manual Download

Page: 2 / 10

MECHA IR Remote Commander and Receiver

v.01

Contents

Introduction................................................................

Before First Use..........................................................

Functions.....................................................................

Power Button .............................................................................................

Menu Button ..............................................................................................

Directional Buttons....................................................................................

Trigger Button............................................................................................

Pause Button..............................................................................................

Numerical Buttons.....................................................................................

Specifications..............................................................

Test the IR Remote Commander & Receiver ..........

MECHA IR Remote Commander & Receiver

Copyright © 2021 by Fanotec International Limited
www.nodalninja.com
www.fanotec.com
To report errors, please send a note to mecha@nodalninja.com.
All rights reserved. No part of this guide may be reproduced or transmitted

in any form by any means, electronic, mechanical, photocopying, recording,

or otherwise, without the prior written permission of the publisher. For

information on getting permission for reprints and excerpts, contact

nick@fanotec.com

Summary of Contents for F9988











Search results

Summary of Contents for F9988

Reviews:

Related manuals for F9988

Brands by name

Popular brands

Fanotec F9988, Manual

Search results

Summary of Contents for F9988

Reviews:

Related manuals for F9988

Brands by name

Popular brands