Rev.23
287/311
When reporting Event Data (Slave devices only)
When sending multi-fragment responses (Slave devices only)
Sometimes. If 'Sometimes', when?
Configurable
as: “Only when reporting event data”, or “When reporting event data or
multi-fragment messages
.”
Timeouts while waiting for:
Data Link Confirm
None
Default at 5000ms Variable
Configurable
Complete Appl. Fragment
None
Fixed at ____ Variable
Configurable
Application Confirm
None
Default at 5000ms Variable
Configurable
Complete Appl. Response
None
Fixed at ____ Variable
Configurable
Others
Need Time Interval, configurable, default Enable
Need Restart IIN, configurable, default Disable
Unsolicited Response Retry Delay, configurable, default 2000ms
Unsolicited Offline Interval, configurable, default 3000ms
Sends/Executes Control Operations:
WRITE Binary Outputs
Never
Always
Sometimes
Configurable
SELECT (3) / OPERATE (4)
Never
Always
Sometimes
Configurable
DIRECT OPERATE (5)
Never
Always
Sometimes
Configurable
DIRECT OPERATE - NO ACK (6)
Never
Always
Sometimes
Configurable
Count > 1
Never
Always
Sometimes
Configurable
Pulse On
Never
Always
Sometimes
Configurable
Pulse Off
Never
Always
Sometimes
Configurable
Latch On
Never
Always
Sometimes Configurable
Latch Off
Never
Always
Sometimes Configurable
Queue
Never
Always
Sometimes
Configurable
Clear Queue
Never
Always
Sometimes
Configurable
_______________________________________________________________________
Attach explanation:
All points support the same Function Codes :Direct Operate and Direct Operate-No ACK
All points support the same Control Codes : Pulse ON, Latch ON, Latch OFF, Pulse OFF
and Trip-Pulse ON.
Summary of Contents for SIL B
