background image

 

 

Page 11 

  

10:30am   8/11   #20 

480-948-4928 

10:30am   8/16   #60 

480-948-4928 
FANSTEL CORP 

Caller ID 

Caller ID Service and Call Waiting Caller ID Service 

The "caller identification" service (Caller ID) allows the caller’s phone number 
and/or name to be shown on the display as the call comes in before you pick up 
the phone.  In order to use this feature, 

YOU

 

MUST FIRST SUBSCRIBE TO 

THE CALLER ID SERVICE

 provided by your local telephone company.  The 

name of this service may vary depending on your telephone company.  Before 
using this feature, please make sure you have properly entered your area code 
as explained in the “

Programming Your Area Code

” step of the Introduction 

section of this manual. 

Important Note

: When a new call comes in, you must let your phone ring at least 

2 full times in order for the Caller ID information to be displayed. 
 
The Call Waiting Caller ID service allows the phone number and/or name of a 
waiting caller to be shown during a telephone conversation.  To use this feature, 

YOU

 

MUST FIRST SUBSCRIBE TO CALL WAITING CALLER ID SERVICE

 

with your local telephone company.  The name of this service may vary 
depending on your telephone company. 
 

Caller ID Display 

When you receive a call, the phone number 
appears on the display with the day and time 
the call was received and is then stored in the 

Call Memory

 as shown. 

 
If your Caller ID service includes the caller's 
name, then the caller’s name also appears on 
the display (up to 15 letters) as shown. 
 
The date and time information is received from 

Summary of Contents for BT118


























Reviews: