background image

 

 

Page 9 

  

  
   

4809484928

 

 
  
PickUp                                   UnHold  
VoiceMail                               UnPark
Intercom

More

 01/16    11:43 PM              00:02:50 
 

4809484928 

SMITH JOHN 
 

Using the Telephone 

This telephone is preloaded with scripts to access many TeleVantage features. An end 
user can follow voice prompts from TeleVantage and/or prompts on LCD display to access 
TeleVantage features. 
 
Please refer to your TeleVantage manual for detailed description of using TeleVantage 
features. 

Making a Call 

1.  Pick up the 

Handset,

 press the 

Speaker

 button, or press the 

Ã

 button (when a 

headset  is used), and listen for a dial tone.  

2. Using 

the 

Keypad

, dial the desired telephone number.  The number you are dialing 

will appear on the display as you dial.  When making a call or talking on the phone, 
the 

"In Use"

 light will turn on indicating the phone is in use.  This light will also be on 

whenever another phone on the same phone line is in use. 

 

Editing Telephone Number before Dialing 

You can enter the telephone number you wish to dial before lifting handset or pressing the 

Speaker 

button.  

1.  Use the keypad to enter the telephone 

number. The number is displayed on the 
screen. 

2.  If you enter one or more wrong digits, 

press the 

 

button one or more times till 

incorrect digits are erased. 

3.  When all digits of a telephone number 

are entered, press the 

Dial/Enter

 button. 

The speakerphone is activated and the 
telephone number is dialed automatically. 

Receiving a Call 

1.  When you hear the phone ring, simply pick up the handset from the handset cradle.   

You may also press the 

Speaker 

button 

to answer the call using the 
speakerphone, or press the 

Ã

 button to 

answer using headset. 

2.  When you are finished talking, replace 

the handset in the handset cradle to end 
the call.   If you have been talking using 
the speakerphone, press the 

Speaker 

button to hang up. You may press the 

Goodbye

 button to hang up at any time. 

 

Summary of Contents for ST2118-TV
























Reviews: