background image

 

 

Page 18 

  

• 

"Caller Identification" is a subscription service.  Non-subscribers of this service cannot 

receive caller identification information.  Make sure that the telephone company has 
activated your service. 

• 

The telephone receives call information between the first and second ring.  If the 

caller hangs up or you answer before the second ring, the telephone may not receive 
the call Identification information. 

• 

If you have Call Forwarding Service and your calls are forwarded, the telephone will 

not receive the caller's information.  Calls forwarded using a call forwarding service are 
typically forwarded before completing the second ring.  To receive a caller's information, 
turn off the Call Forwarding feature. 

Important Note

: Make sure you have followed all the instructions in this booklet.  If you 

continue to have problems, call the FANSTEL Product Service Center at (480) 948-4928 
or 

(800) 556-0007

Limited Warranty 

 

This warranty applies only to products purchased and used in the United States.  
 

What Is Covered

?  

Any defect in materials or workmanship. 

 

For How Long

?  

For one year from the date of purchase 

 

What We Will Do

:

 

If we repair your product, we may use new or reconditioned 

replacement parts.  If we choose to replace your product, we may replace it with a new or 
reconditioned one of the same or similar design.  The repair or replacement product will be 
warranted for either (a) 90 days or (b) the remainder of the original one year warranty 
period, whichever is longer.   
 

What We Ask You To Do

: You must prepay all shipping and handling costs.  We 

suggest you retain your original packing material in the event you need to ship your 
product.  When sending your product for repair service, include your name, address, 
telephone number with area code, proof of date of purchase, prepaid shipping and 
handling costs, and a description of the problem.  Send all of this to:  

 

FANSTEL, ATTN: WARRANTY REPAIR 

7466 E. MONTE CRISTO AVE 

SCOTTSDALE, AZ 85260 

 

 

Warranty Limitation

 

Implied warranties, including those of fitness for a particular purpose and merchantability 
(an unwritten warranty that the product is fit for ordinary use), are limited to one year from 
date of purchase.  We will not pay for loss of time, inconvenience, loss of use of your 
product, or property damage caused by your product or its failure to work, or any other 

Summary of Contents for ST2118-TV
























Reviews: