Fanstel ST218B, Owner'S Manual

Page 14 

                   #00 
             
ENTER NUMBER>

                   #00 
4809484928            
USE SAVE TO END

                    
             
SAVE TO?

                   
4809484928            
ENTER NAME> 

USE SAVE TO END 

2. Press 

the 

σ

 button or the 

τ

 button until the record you want is displayed. 

3.  You can also press the appropriate keypad button one or more times to reach the first 

character of the name for which you are searching.  For example, by pressing 

5, 5

(two times), the first record with a name starting with “

K

” is displayed.  Press the 

τ

button and the next 

K

 listing is displayed. 

4.  To dial the number displayed, lift the handset and press the 

Dial/Enter

 button.  If you 

press the 

Dial/Enter

 button without lifting the handset, the speakerphone is activated 

automatically before dialing. 

5.  To leave the directory mode at any time, press the 

Goodbye 

button.   

Deleting Entries in the Directory 

To delete an individual entry in the directory, press the 

Delete

 button once when the entry 

is displayed.  The displayed entry is permanently erased. 
  
To delete all of the entries stored in the directory: 
1. Press 

the 

Directory

 button. 

2.  Press and hold the 

Delete

 button for 4 – 5 seconds until “

DELETE

ALL!

” appears.  

All entries in the directory are permanently erased. 

Storing a New Number and Name in the Memory Buttons 

To store a new number and name in the memory buttons:                    

1. Press 

the 

Save

 button when the display shows no 

caller’s number or name.  The “

SAVE TO?

” prompt 

appears on the display. 

2.  Press the memory button where you wish to store 

this telephone number (e.g., 

M1)

.  The “

ENTER 

NUMBER>

“ prompt appears on the display.  

3.  Use the keypad to enter the telephone number, 

including the long distance prefix that you need to 
dial this number.  Insert a pause or multiple pauses 
where required by using the 

Redial/Pause

 button.  

Then press the 

Save 

button.  

Note: If you need to dial an outside line access code, 
do NOT include the outside line access code in the 
phone number you entered.  The outside line access 
code is dialed automatically if you entered it during 
the “Installation” procedures. 

 
4.  The third line of LCD displays “

ENTER NAME

” and 

“

USE SAVE TO END

”, alternatively 

5.  Use the keypad to input the first character of the 

name.  The number and letters on each telephone 
button are displayed in turn.