4
C.
Attach the secure line to the lens and the housing, in order to secure the
lens to the housing.
D.
Please note that the BigEye Lens was designed to work underwater
only.
Therefore, the lens should only be installed underwater, while
letting water enter the gap between the BigEye Lens and the housing lens
port. Make sure that there are no air bubbles trapped between the
BigEye Lens and the housing lens port before taking images.
E.
During the beginning of your dive, your lens might become foggy as a
result of an increase in the air temperature inside the lens, following
submersion in cooler water. Storing the lens in a cool dry place when not
being used, such as a padded housing bag with a few silica gel packs
inside, and submerging it in cool water for 10 minutes prior to the dive,
will assist in preventing such condensation. However, even if your BigEye
Lens starts fogging up at the beginning of the dive due to temperature
differences, please note that continuing to dive with it for about 10
minutes will eventually dissolve the fog.
Image B
Image A
Summary of Contents for BigEye Lens MPK Series
Page 1: ...1 ...
