4. Attaching the blades
Remove the decorative cover from the fan motor housing
by remove the two decorative cover screws on the motor
housing.
Remove three blade upper section attachment screws
from the fan motor through the motor window.
Secure fan upper section with the screw previously
removed through the motor window.
Align three holes on blade support plate with three
holes on blade lower section and on blade arm, and
secure with three blade lower section attachment
screws with lock washers provided.
Repeat this procedure for remaining blades.
Re-install the decorative cover back to the fan motor
housing by using the two decorative cover screws
previously removed.
