Page 5
Step 6
You will need:
1 x
Dowel
(H1)
1 x Cam Bolt
(H3)
Step 4
You will need:
3 x CL Runner
Tracks
(H6)
9 x Small
Screws
(H5)
Step 5
You will need:
3 x CR Runner
Tracks
(H7)
9 x Small
Screws
(H5)
(P4)
(P4)
Insert 1 x Cam Nut (H4) into the hole
of Rail (P6).
Rotate the cam nut so the arrows point towards the incoming cam bolt.
Insert 1 x Dowel (H1) into Rail (P6). Attach 1 x Cam Bolt (H3) into Rail (P6) as shown.
Attach 3 x Rails (P5) and Rail (P6) to Right Side Panel (P3),
then tighten the cam nuts.
Attach 3 x CL Runner Tracks (H6) to Divider (P4) with 9 x Small Screws (H5).
H5
H5
H6
H6
H5
H5
H5
H5
H5
H5
H5
(P5)
(P5)
(P5)
(P6)
(P3)
H4
H5
H5
H5
H5
H5
H5
H5
H5
H7
H7
H7
H5
H1
H3
1 x Cam Nut
(H4)
Turn Divider (P4) over to the other side, and then attach
3 x CR Runner Tracks (H7) with 9 x Small Screws (H5).
H6
CL
H5
H7
CR
H5
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
