(P12)
(P13)
(P15)
Attach Drawer Back (P15) to Drawer Sides (P12, P13)
with 4 x Long Screws (H12), make sure that
the groove lines up the whole way around the drawer.
Tighten Screws using a Phillips head screwdriver.
H12
H12
H12
H12
Phillips head
screwdriver
You will need
4 x Long
Screws(H12)
Step 17
4 x Small
Screws (H5)
You will need
1 x DL Runner
(H8)
1 x DR Runner
(H9)
(P11)
H8
DL
H5
H9
H5
DR
H5
H5
H13
H14
H14
Attach 1 x DL Runner (H8) to the bottom of Left Drawer Side (P12) and
1 x DR Runner (H9) to the bottom of Right Drawer Side (P13) with 4 x Small Screws (H5).
Tighten Screws using a Phillips head screwdriver.
Attach 1 x Handle (H13) to Drawer Front (P11) with 2 x Round Head Bolts (H14).
Tighten round head bolts using a Phillips head screwdriver.
Repeat Step 14 to Step 19 to assemble the other drawer.
Step 18
Phillips head
screwdriver
You will need
1 x Handle
(H13)
2 x Round Head
Bolts (H14)
Phillips head
screwdriver
Step 19
www.fantasticfurniture.com.au
PAGE 11
(P13)
(P12)
H9
H8
H5
H5
H5
H5
