www.fantasticfurniture.com.au
PAGE 5
Attach 8 x Cam Bolts (H3) into Legs (P7, P8, P9, P10).
You will need
Step 1
You will need
Step 2
(P3)
(P7)
(P9)
(P10)
(P8)
8 x
Cam Bolts
(H3)
Phillips head
screwdriver
(P2)
H4
H4
H1
H1
H1
H1
H4
H4
You will need
Step 3
Insert 4 x Dowels (H1) into the holes of Left Side Panel (P2).
Insert 4 x Cam Nuts (H4) into the holes of Left Side Panel (P2).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Legs (P7, P9) to Left Side Panel (P2), then tighten the cam nuts.
This is how a cam nut works........
The head of the cam
bolt goes into the open
mouth of the cam nut.
You then turn the cam
nut so it tightens over
the bolt.
(P7)
(P9)
H4
H4
H4
H4
(P10)
(P8)
Insert 4 x Dowels (H1) into the holes of Right Side Panel (P3).
Insert 4 x Cam Nuts (H4) into the holes of Right Side Panel (P3).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Legs (P8, P10) to Right Side Panel (P3), then tighten the cam nuts.
H3
H3
H3
H3
H3
H3
H3
H3
4 x Cam Nuts
(H4)
Flat head
screwdriver
4 x Dowels
(H1)
4 x Cam Nuts
(H4)
Flat head
screwdriver
4 x Dowels
(H1)
H1
H1
H1
H1
