Step 3
You will need:
Step 4
Next, attach either of the sides (P2) with one person at either end. Place a 40mm bolt (H2)
through each of the 4 holes at the outside of the end (P1)and fix using the Allen Key (H8).
Do not over tighten or bolts may cross thread. Tighten only until the bolt is engaged at this
stage. DO NOT ATTEMPT TO INSTALL THE BED RAILS (P4) AND COT SIDES
(P2)SIMULTANEOUSLY..
4x Bolts
(H2)
Allen key
(H8)
Repeat step 3 to connect the other side (P2).
Step 4
Page 5
4x Bolts
(H2)
Allen key
(H8)
