EN
3 / 12
RAID Jumper Setting:
USERS SHOULD ONLY SET UP THE RAID-MODE, WHEN THE DEVICE IS POWERED OFF!
1.
When both HDD insert at the same time under RAID mode all data will be
formatted.
2.
For the first time usage, please install one main source HDD and power “on”
DB-R35DUE. Wait until “error” indicator on the second HDD lights on, system had
set first HDD to Main HDD then power “off” DB-R35DUE. Please install second
HDD and power “on” again. System will automatically “rebuild” data to second
target HDD. (If both HDDs are new with no data, then both HDDs can install at the
same time.)