English
20 / 51
The testing process will take for a while, please be patient to wait. If the test is ok, the
network information (Profile Name, IP address, Subnet Mask, Gateway, etc.) will be
displayed on the screen.
-
Peer to Peer (Ad Hoc)
Peer to Peer mode, which is also called Ad Hoc mode or computer-to-computer mode, is
used to connect wireless clients directly together, without the need for a wireless router or
access point.
Ad-Hoc Setup
Press
ENTER
to go to next step, press
RETURN
to cancel, and press
PLAY
to connect.
-
WPS (AP)
WPS, Wi-Fi Protected Setup, is used to connect a wireless router directly, without
searching SSID and inputting password. In this mode, you just need to configure the
parameters of your router which support WPS function. There are two modes for you to
select, PBC mode and PIN mode.
PBC
First press the WPS button on the router or select the button mode in the configuration menu
of the router, then select the PBC mode, the connection process will take for a while, please be
patient to wait.
PIN
Input the pin code when configure your router, then select the PIN mode, the connection
process will take for a while, please be patient to wait.
