Fantech HEPA DM 3000P, Installation, Operation And Maintenance Manual

7

fantech

  Warranty

•  The maintenance free motors are 

permanently lubricated and are 
guaranteed for 7 years. They are 
factory balanced to prevent 
vibrations and promote silent 
operation.

• All other components have a 5 year 

limited warranty. (filters not included)

• The limited warranty covers normal 

use. It does not apply to any defects, 
malfunctions or failures as a result 
of improper installation, abuse, 
mishandling or misapplication, 
fortuitous occurrence or any other 
circumstances outside 
manufacturer's control.

• The warranty is in effect for 5 years 

on parts and 7 years on the motor 
after the date of purchase, including 
parts replaced during this time 
period. If there is no proof of 
purchase available, the date 
associated with the serial number 
will be used for the beginning of the 
warranty period. Parts are a 1 year 
warranty when replaced after the 
initial warranty has expired.

• This warranty is the exclusive and only 

warranty in effect and all other 
warranties either expressed or 
implied are invalid.

• Warranty from the manufacturer is 

for parts only and does not include 
labor or shipping to service or repair 
them.

Service

The useful service life of the filter media in the HEPA Filtration System is directly related to the 
volume of air passed through the system and the amount of contaminants in the air. In a typical 
residential application, Stage 1 and 2, filters should be replaced every three to six months or when 
needed. The Stage 3 HEPA filter should have a life span of two to five years, again, depending on  
the amount of particulate in the air and the maintenance of the Stage 1 pre-filter.
As an added service, Fantech offers an online filter replacement reminder service. Just go to 
www.fantech.net and for "Reminder Service" and follow the links. All you need to enter is your e-mail 
address, the product model and a description of the environment (Very Clean, Clean, Moderate).
The Service will send an e-mail after the elapsed time period when it is time to replace your filters.

Filter replacement

Stage 1   -   Prefilter: Air passes through the prefilter where larger particles are taken out of the 

air. (part number  40195, also available in packs of 24 part numer 40196)

Stage 2   -   Carbon: Air passes through the carbon filter where some gases and odors are 

removed. (part number  40195, also available in packs of 24 part numer 40196)

Stage 3   -   HEPA: Air passes through the certified HEPA media where very small particles are 

removed. 99.97% of all particles 0.3 microns and larger that pass through this stage 
are removed. Particles smaller than 0.3 microns are also removed with less intensity.

If the air flow through your unit is noticeably reduced, you can inspect the HEPA filter by removing it 
and seeing if the filter paper is darkened on the inlet or outer side. If it is, the filter cartridge should 
be replaced. (part number  40193, also available in packs of 12 part numer 40194)

Please contact your local Fantech dealer or call HEPA Customer Service at 1.800.565.3548 
regarding replacement of filter media, warranty information or if you have any questions or 
concerns about the performance of your HEPA Filtration System.

Replacement parts number for motor (410035) and for capacitor (410040).

Stage 1

Stage 3

Stage 2