Seven (7) Year Warranty
Limitation of Warranty and Liability
Warning
DURING ENTIRE WARRANTY PERIOD:
FANTECH will repair or replace any part which has a factory defect in
workmanship or material. Product may need to be returned to the Fantech
factory, together with a copy of the bill of sale and identified with RMA number.
FOR FACTORY RETURN YOU MUST:
• Have a Return Materials Authorization (RMA) number. This may be obtained
by calling FANTECH either in the USA at 1.800.747.1762 or in CANADA at
1.800.565.3548. Please have bill of sale available.
• The RMA number must be clearly written on the outside of the carton, or the
carton will be refused.
• All parts and/or product will be repaired/replaced and shipped back to buyer;
no credit will be issued.
OR
The Distributor may place an order for the warranty part and/or product and is
invoiced. The Distributor will receive a credit equal to the invoice only after
product is returned prepaid and verified to be defective.
FANTECH WARRANTY TERMS DO NOT PROVIDE FOR REPLACEMENT WITHOUT
CHARGE PRIOR TO INSPECTION FOR A DEFECT. REPLACEMENTS ISSUED IN
ADVANCE OF DEFECT INSPECTION ARE INVOICED, AND CREDIT IS PENDING
INSPECTION OF RETURNED MATERIAL. DEFECTIVE MATERIAL RETURNED BY END
USERS SHOULD NOT BE REPLACED BY THE DISTRIBUTOR WITHOUT CHARGE TO
THE END USER, AS CREDIT TO DISTRIBUTOR’S ACCOUNT WILL BE PENDING
INSPECTION AND VERIFICATION OF ACTUAL DEFECT BY FANTECH.
THE FOLLOWING WARRANTIES DO NOT APPLY:
• Damages from shipping, either concealed or visible. Claim must be filed
with freight company.
• Damages resulting from improper wiring or installation.
• Damages or failure caused by acts of God, or resulting from improper
consumer procedures, such as:
1. Improper maintenance
2. Misuse, abuse, abnormal use, or accident, and
3. Incorrect electrical voltage or current.
• Removal or any alteration made on the FANTECH label control number
or date of manufacture.
• Any other warranty, expressed, implied or written, and to any consequential
or incidental damages, loss or property, revenues, or profit, or costs of
removal, installation or reinstallation, for any breach of warranty.
WARRANTY VALIDATION
• The user must keep a copy of the bill of sale to verify purchase date.
• These warranties give you specific legal rights, and are subject to an applicable
consumer protection legislation. You may have additional rights which vary from
state to state.
Fantech, reserves the right to modify, at any time and without notice, any or all
of its products’ features, designs, components and specifications to maintain
their technological leadership position.
Item #: 450065
Rev Date: 0810
United States
1712 Northgate Blvd.,
Sarasota, FL. 34234
Phone: 800.747.1762;
941.309.6000
Fax: 800.487.9915; 941.309.6099
www.fantech.net; info@fantech.net
Canada
50 Kanalflakt Way,
Bouctouche, NB E4S 3M5
Phone: 800.565.3548;
506.743.9500
Fax: 877.747.8116; 506.743.9600
www.fantech.ca; info@fantech.ca
This warranty does not apply to any FANTECH INC. product or part which has failed as a result of faulty installation or abuse, incorrect electrical
connections or alterations made by others, or use under abnormal operating conditions or misapplication of the product or parts. We will not
approve for payment any repair not made by us or our authorized agent without prior written consent. The foregoing shall constitute our sole and
exclusive warranty and our sole exclusive liability, and is in lieu of any other warranties, whether written, oral, implied or statutory. There are no
warranties which extend beyond the description on the page hereof. In no event, whether as a result of breach of contract, or warranty or alleged
negligence, defect incorrect advice or other causes, shall FANTECH be liable for special or consequential damages, including, but not limited to,
loss of profits or revenue, loss of use of equipment or any other associated equipment, cost of capital, cost of substitute equipment, facilities or
services, downtime costs, or claims of customers of purchase for such damages. FANTECH neither assumes or authorizes any person to assume
for it any other liability in connection with the sale of product(s) or part(s). Some jurisdictions do not allow the exclusion or limitation of incidental
or consequential damages so the above limitations and exclusions may not apply to you.
FANTECH, INC. products are designed and manufactured to provide reliable performance, but they are not guaranteed to be 100% free from defects. Even reliable
products will experience occasional failures and this possibility should be recognized by the user. If these products are used in a life support ventilation system where
failure could result in loss or injury, the user should provide adequate backup ventilation, supplementary natural ventilation, failure alarm system, or acknowledge
willingness to accept the risk of such loss or injury.
Housing Dimensions
of 4" duct models
Housing Dimensions
of 6" duct models
9
11
⁄
16
" (246mm)
9
9
⁄
16
" (243mm)
7
3
⁄
16
" (182.5mm)
8
15
⁄
16
" (227mm)
5
13
⁄
16
" (148mm)
1
3
⁄
1
6
"
(2
1
m
m
)
5
5
⁄
1
6
"
(1
3
4
m
m
)
4
"
(1
0
2
m
m
)
5
⁄
1
6
"
(8
m
m
)
5
13
⁄
16
" (148mm)
9" (230mm)
8" (205mm)
6
"
(1
5
0
m
m
)
1
7
1
⁄
4
"
(4
3
8
m
m
)
