background image

Megadisk NAS Owner’s Manual

25

2.5.1.3 The MegaDisk NAS will routinely 

perform S.M.A.R.T. tests to ensure the 
health of the disks. The resulting pass 

or fail will display in the “Health” cell 

next to its respective disk. To see the 

detailed results of the latest SMART test, click the “

” button.

2.5.1.4 Disk Power Saving can be set by entering a value in minutes in the “Disk Spin Down 

Time:” Entry box, or enter “0” to disable. Click the “

” button to commit.

 

2.5.2 RAID Utility

The  RAID  utility  allows  you  to  manage  your  

RAIDsets.  You  may  create,  erase,  format  or 
change  file  systems,  mount  USB  disks,  check 
SMART status, and perform disk error checking 
(Scandisk.) To access the disk utilities, navigate 

to “Control  Panel”  -> “Maintenance”  -> “RAID  Utility”.

 The  current  RAIDset  (if  exists)  will 

display, along with RAID level, file system, total size and free space. To create or change a 

RAIDset, the disks must first be erased. Click on the “

” button. A confirmation 

dialog will appear, and following confirmation the disks will be erased and the MegaDisk 
NAS will be restarted. Please allow approximately 
2  minutes  for  the  reboot  process  to  complete. 
Re-log into the administration GUI and return to 
the  RAID  utility.  Select  the  desired  RAID  level 
(0, 1, or span) and file system (EXT2 or 3.) Click 

” to begin the RAID creation process.   

A  confirmation  dialog  will  appear  and  the 
process will commence. Once the RAID creation 
is complete, the MegaDisk NAS will be restarted. 
Please  allow  approximately  2  minutes  for  the 
reboot process to complete. Please note that the 
MegaDisk  NAS’  netbios  name  will  revert  to 

“GForceNAS” following the RAID creation. 

2.5.3 Update Firmware

Fantom Drives strives to continually improve and from 

time  to  time  will  release  firmware  updates  for  the 
MegaDisk  NAS.  Firmware  will  either  be  made 
available on Fantom Drives’s website or provided by 
Fantom  Drives  Technical  Support.  To  access  the 

Firmware  Upgrade,  navigate  to “Control  Panel”  -> “Maintenance”  -> “Firmware  Upgrade”.   

Click  the 

  button  next  to  the  Firmware  entry  box.  Navigate  and  select  your  saved 

settings file. Click 

 to begin the upload, 

and  confirm  the  operation  in  the  following 
confirmation dialog. 

IMPORTANT: 

if the disks are reformatted or RAID 

level  is  changed,  the  MegaDisk  NAS  will  revert 

to its factory Netbios name “GForceNAS.” Please 

note that you will need to change the Netbios name back 

to your setting before attempting to access it.

!

IMPORTANT: 

Make  sure  all  user  data  and 

system settings are backed up before updating 

firmware!

!

3-Administering the MegaDisk NAS

Note: 

S.M.A.R.T, or Self-Monitoring, Analysis, and Reporting 

Technology is a monitoring system for computer hard disks 
to detect and report on various indicators of reliability.

Summary of Contents for MDN1000








































Reviews: