Fantom Professional PROMIDI 250WP, Manual

•  Unlock the locking latches pulling outwards to the right and left.
•  Put the motor bonnet away through holding it from carrying handle.
•  The tank should be clean and empty before wet vacuuming function.
•  Do not put water into your tank for wet vacuuming function.
•  Put the motor bonnet back on the tank and lock the latches by pushing  
  right and left.
•  Insert  the hose by pushing it into the suction mouth.
•  Plug-in your machine’s cable to the power socket.
•  Plug the attached tubes to the hose handle. Instead of using two  

  extension tubes, you can use your machine with only one tube or without  
  any extension tube by connecting accessories directly to the hose
 handle.
•  Operate your machine by using ON-OFF switch.
•  When the fluids have reached the highest permitted level in the tank,   
  buoy automatically blocks the suction and the motor gets noisier. In this  
  case, switch off the machine immediately, pull the plug and remove the  
  motor bonnet from the tank. Empty the tank and then restart your    
 machine.
•  If the place is so deep for wet vacuuming function, do not dip all of the  
  accessory so as not to block air circulation. If the liquid is on a smooth  
  area, use wet vacuuming function with your suitable accessory by
  moving forward and back.

•  Unlock the locking latches pulling outwards to the right and left.
•  Put the motor bonnet away through holding it from carrying handle.
•  Put some water up to maximum level into the tank (3 lt.)
•  Put the motor bonnet back on the tank and lock the latches.
•  Plug the attached tubes to the hose handle. Instead of using two  

  extension tubes, you can use your machine with only one tube or without  
  any extension tube by connecting accessories directly to the hose
 handle.
•  Insert  the hose by pushing it into the suction mouth.
•  Plug-in your machine’s cable to the power socket.
•  Operate your machine by using ON-OFF switch.
•  By moving forward and back your suitable accessory for the surface you  
  want to clean, make dry vacuuming function.

Note : Never use your vacuum cleaner without filter with water filtration 
function. 

WATER FILTRATION

EN

ASSEMBLY FOR WET VACUUMING FUNCTION