22
Notice:
1
）
You need save the configuration and reboot the phone after set this page.
2
）
If you modify the port of Telnet and HTTP, you would better set the value more than 1024
because the port value less than 1024 is system port reserved.
3
）
if you set 0 for the HTTP port, it will disable HTTP service.
4.3.2.4. TIME&DATE
Setting time zone and SNTP (Simple Network Time Protocol) server according to your location, you can
also manually adjust date and time in this web page
.
SNTP
Field name
explanation
Enable SNTP
Enable SNTP by selecting it
Enable DHCP Time
Enable DHCP Time by selecting it, then the
phone will automatically synchronize the standard time.
Primary Server
Set SNTP Primary Server IP address.
Secondary Server
Set SNTP Secondary Server IP address
Timezone
Select the Time zone according to your location.
Resync Period
Set the Resync Period, the default is 60 seconds.
12 –Hour Clock
Switch the time mechanism between 12 hours and 24 hours.
Default is 24 hours mode.
Enable
Enable daylight saving time
Offset(minutes)
Setup the variety length
Month
Setup stat and end month
Week
Setup start and end week
Day
Setup start and end day
Hour
Setup start and end hours
